18-1/2-Inch One-Touch Cleaning System Kit for Weber 7444 Charcoal Kettle Grills

One-touch cleaning system replacement kit

Restore the one-touch cleaning system on a compatible 18-1/2-inch charcoal kettle grill with this replacement kit. It is made from stainless steel metal and is intended as a replacement for Weber 7444 charcoal grill and kettle grill systems.

The system uses the fitted metal blades inside the grill bowl to help operate the one-touch cleaning arrangement. It is a practical replacement part for a grill that needs its cleaning mechanism renewed, rather than a general-purpose barbecue cleaning brush.

Who it suits

This kit is suited to owners of a compatible 18-1/2-inch charcoal kettle grill who are replacing the one-touch cleaning system. It may also be useful when maintaining an older grill whose original mechanism has become unsuitable for continued use.

Compatibility should be checked carefully before ordering. The supplied replacement reference is Weber 7444 for charcoal and kettle grills. Compare the grill diameter, existing one-touch arrangement and mounting points with the measurements below, as this part should not be assumed to fit every kettle barbecue.

How to choose the correct replacement

• Grill size: the kit is identified for 18-1/2-inch grills.
• Grill type: it is intended for charcoal kettle grill systems.
• Replacement reference: compare your existing part with Weber 7444 before fitting.
• Material and finish: the parts are stainless steel metal with no coating.
• Pack option: this listing is available as a 1pc pack.

Exact dimensions shown for the components include approximately 7.85 inches for each cleaning blade, 9.45 inches for the operating handle, and smaller connector pieces measuring approximately 1.5 inches, 1.72 inches and 0.82 inches as illustrated. Use these measurements alongside your original components when checking suitability.

Installation guidance

The cleaning system is assembled from the numbered metal sections. During installation, follow the order marked on the blades and position the components in sequence around the centre fitting. Check that the parts are seated correctly and that the operating handle is connected to the mechanism before using the grill.

Allow the barbecue and all internal parts to cool fully before removing an old system or fitting the replacement. If your grill uses a different bowl size, mounting arrangement or cleaning mechanism, compare it with the supplied dimensions and replacement reference before attempting installation.

Care and storage

The components have a stainless steel, uncoated finish. After the grill has cooled, remove loose ash and residue from the mechanism and keep the moving parts clear so the one-touch assembly can be checked during routine grill maintenance. Wipe the parts clean as appropriate for stainless steel and dry them before storage or refitting.

Store the replacement components in a dry place when they are not being installed. Inspect the blades, centre fitting and handle before use, particularly if the original cleaning system has been damaged or heavily worn.

At a glance

• 18-1/2-inch one-touch cleaning system kit
• Replacement reference: Weber 7444 charcoal grill and kettle grills
• Stainless steel metal construction
• Uncoated finish
• Model number: 1pc
• Available pack quantity: 1pc
• Manufactured in Mainland China

Product specifications