Metal BBQ Handle Spring for Grills, Smokers, Stoves and Fireplaces, 11cm or 14cm

Metal handle spring for barbecue and stove equipment

This silver metal handle spring is an accessory for replacement or repair work on barbecue pits, grills, smokers, wood-burning furnaces, stoves and fireplaces. Its coiled construction provides a practical handle component for suitable equipment where the existing handle spring has become damaged, worn or missing.

Choose the correct length and end diameter for your particular handle assembly. Compatibility is not universal, so compare the measurements below with your existing spring, fixing arrangement and available space before ordering.

Choose the right size

Two size options are available. The options differ in spring handle length and end diameter, while both have a 30mm centre diameter.

• 11cm option: spring handle length of 11cm, end of spring diameter of 16mm and centre of spring diameter of 30mm.
• 14cm option: spring handle length of 14cm, end of spring diameter of 15mm and centre of spring diameter of 30mm.

Measure the spring currently fitted to your equipment where possible. Pay particular attention to the overall handle length, the diameter at each end and the 30mm centre diameter. These checks can help you select between the 11cm and 14cm options, but the fixing method and surrounding handle parts should also be compared with your setup.

Where it can be used

The accessory is intended for a range of outdoor-cooking and heating equipment, including barbecue pits, grills and smokers. The listed uses also include wood furnaces, stoves and fireplaces. It is therefore suited to repair and replacement projects where a coiled metal handle component is required, provided the dimensions match the equipment.

Use the product as a replacement accessory rather than assuming it will fit a particular make or model. No specific barbecue, stove, smoker or fireplace model compatibility is stated. If you are replacing an existing part, retain the original spring until you have checked its measurements against your chosen option.

Material and appearance

• Material: metal
• Colour: silver
• Accessory type: handle spring
• Available lengths: 11cm and 14cm

The open coil form and silver finish are clearly visible, with narrower ends and a wider central section. The dimensions refer to the spring handle length and the stated end and centre diameters.

Before fitting

Check the replacement against the original component and the handle assembly before fitting. Confirm the selected length, end diameter and centre diameter, and make sure the spring can be positioned correctly within the intended handle. As this is a metal replacement accessory, take care when handling the coil and any exposed ends during installation.

This product is listed under the JETTING brand and is manufactured in Mainland China. The listing is for one handle spring, with the selected size determining whether the 11cm or 14cm version is supplied.

Product specifications